{"title":"Materials: Texture Roller","description":null,"products":[{"product_id":"rolling-pin-frozen-1225","title":"Rolling Pin Frozen 1225","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Frozen 1225\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eRolling Pin - Frozen\u003c\/p\u003e\n\n\u003cp\u003eTextured rollers capable of imprinting a continuous repeated pattern on clay and putties. Made from clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in different textures that you can buy according to your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inch)\u003c\/p\u003e\n\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay thoroughly until ready according to the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface to be textured. To ensure an optimal result, make sure you have a smooth and even surface before making an impression with the rollers. \u003cstrong\u003eWe recommend using a plain roller for this purpose.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the roller to prevent sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying equal pressure at all points for an even texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut off excess putty\/clay with a sharp knife. It is recommended to do this after it has dried to prevent distortions in the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\n\u003cp\u003eThere are countless different types of putty and clay on the market, and all of them can be textured with the right technique.\u003c\/p\u003e\n\n\u003cp\u003eTypically, polymer clay (Fimo or Sculpey type) is quite easy to work with these rolling pins, as they allow for easy correction of mistakes before baking. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly onto an MDF base and then place everything in the oven, including the base. The cooking time for these clays is approximately 15 minutes at 150ºC. MDF wood may emit a slight odor, similar to toasted bread, but don't worry, it won't burn!\u003c\/p\u003e\n\n\u003cp\u003eIn the case of epoxy putties, there are different techniques that yield similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic surfaces.\u003c\/p\u003e\n\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is necessary to lightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\n\u003cp\u003eOther epoxy putties such as, for example, Milliput putty are also suitable, but we recommend not wetting them too much as this will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFor this type of epoxy putties, it is very important to clean the rollers thoroughly after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\n\u003cp\u003eAfter working with the rollers, use a scratch brush (LINK) and plenty of water to remove any residue from the rollers, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\n\u003cp\u003eTo ensure safety, children must be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222457114954,"sku":"GSW1225","price":12.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/1225-rolling-pin-hobby-roller-wood-frozen-1.webp?v=1772304826"},{"product_id":"rolling-pin-runic-1222","title":"Rolling Pin Runic 1222","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Runic 1222\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eRolling Pin - Runic\u003c\/p\u003e\n\n\u003cp\u003eTextured rollers capable of printing a continuous repeated pattern on clay and putty. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in different textures that you can buy according to your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inch)\u003c\/p\u003e\n\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface to be textured. For optimal results, ensure you have a smooth and even surface before imprinting with the rollers. \u003cstrong\u003eWe recommend using a regular roller for this purpose.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the roller to prevent sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying equal pressure at all points for an even texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut away excess putty\/clay with a sharp knife. It is recommended to do this after it has dried to prevent deformation of the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\n\u003cp\u003eThere are numerous different types of putty and clay on the market, and all of them can be textured with the correct technique.\u003c\/p\u003e\n\n\u003cp\u003eTypically, polymer clay (Fimo or Sculpey type) is quite easy to work with these rolling pins, as they allow for easy correction of mistakes before baking. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly onto an MDF base and then place everything in the oven, including the base. The cooking time for these clays is about 15 minutes at 150ºC. MDF wood may leave a slight smell, similar to that of toasted bread, but don't worry, it won't burn!\u003c\/p\u003e\n\n\u003cp\u003eIn the case of epoxy putties, there are different techniques that yield similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic substrates.\u003c\/p\u003e\n\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to slightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\n\u003cp\u003eOther epoxy putties such as, for example, Milliput putty are also suitable, but we recommend not to make them too wet as this will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFor these types of epoxy putties, it is very important to clean the rollers thoroughly after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\n\u003cp\u003eAfter working with the rollers, use a scratch brush (LINK) and plenty of water to remove any residue on the rollers, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\n\u003cp\u003eTo ensure safety, children should be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222457180490,"sku":"GSW1222","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/1222-rolling-pin-hobby-roller-runic-1.webp?v=1772304827"},{"product_id":"rolling-pin-wood-planks-1226","title":"Rolling Pin Wood Planks 1226","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Wood Planks 1226\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eRolling Pin - Wooden Planks\u003c\/p\u003e\n\n\u003cp\u003eTextured rolling pins able to print a continuous repeated pattern on clay and putty. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in different textures that you can acquire based on your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inches)\u003c\/p\u003e\n\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eINSTRUCTIONS FOR USE:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface that needs to be textured. For optimal results, ensure you have a smooth and even surface before impressing with the rollers. *** We recommend using a regular rolling pin for this purpose.\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the rolling pin to prevent sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying equal pressure at all points for an even texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut away excess putty\/clay with a sharp knife. It is recommended to do this after it has dried to avoid deformation of the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eMATERIALS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are numerous different types of putty and clay on the market, and all of them can be textured with the correct technique.\u003c\/p\u003e\n\u003cp\u003eUsually, polymer clay (Fimo or Sculpey type) is quite easy to work with these rolling pins, as they allow for easy correction of mistakes before baking. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly onto an MDF base and then place everything into the oven, including the base. The cooking time for these clays is approximately 15 minutes at 150ºC. MDF wood may leave a slight odor, similar to toasted bread, but don't worry, it will not burn!\u003c\/p\u003e\n\u003cp\u003eIn the case of epoxy putties, there are various techniques that yield similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic bases.\u003c\/p\u003e\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to slightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\u003cp\u003eOther epoxy putties such as Milliput putty are also suitable, but we recommend not wetting them too much as this will hinder your work. Moreover, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone.\u003c\/p\u003e\n\u003cp\u003e*** For these types of epoxy putties, it is very important to clean the rollers thoroughly after use.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eMAINTENANCE INSTRUCTIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAfter working with the rollers, use a scratch brush (LINK) and plenty of water to remove any residue from the rollers, if necessary.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSAFETY:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo ensure safety, children must be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222457311562,"sku":"GSW1226","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/1226-rolling-pin-hobby-roller-wood-planks-1.webp?v=1772304830"},{"product_id":"rolling-pin-dutch-bricks-1336","title":"Rolling Pin Dutch Bricks 1336","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Dutch Bricks 1336\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eRolling Pin - Dutch Wall (Bricks)\u003c\/p\u003e\n\n\u003cp\u003eTextured rollers capable of printing a continuous repeated pattern on clay and putty. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in a variety of textures you can buy based on your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inch)\u003c\/p\u003e\n\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface to be textured. For optimal results, ensure you have a smooth and even surface before imprinting with the rollers. *** We recommend using a regular roller for this purpose.\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to moisten the roller to prevent sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying equal pressure at all points for a uniform texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut away excess putty\/clay with a sharp knife. It is recommended to do this after it has dried to prevent distortion in the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\n\u003cp\u003eThere are many different types of putty and clay on the market, and all of them can be textured with the right technique.\u003c\/p\u003e\n\n\u003cp\u003eTypically, polymer clay (Fimo or Sculpey type) is quite easy to work with these rolling pins, as they allow for easy correction of mistakes before baking. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly on an MDF base and then place everything in the oven, including the base. The cooking time for these clays is about 15 minutes at 150ºC. MDF wood may leave a slight odor, similar to that of roasted bread, but don't worry, it won't burn!\u003c\/p\u003e\n\n\u003cp\u003eIn the case of epoxy putties, there are different techniques that yield similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic surfaces.\u003c\/p\u003e\n\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to lightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\n\u003cp\u003eOther epoxy putties such as Milliput putty are also suitable, but we recommend not wetting them too much as this will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone.\u003c\/p\u003e\n\n\u003cp\u003e*** For this type of epoxy putties, it is very important to clean the rollers thoroughly after use.\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\n\u003cp\u003eAfter working with the rollers, use a scratch brush (LINK) and plenty of water to remove any residue on the rollers, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\n\u003cp\u003eTo ensure safety, children should be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222457377098,"sku":"GSW1336","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/1336-rolling-pin-dutch-bricks-1.webp?v=1772304831"},{"product_id":"rolling-pin-aztec-1397","title":"Rolling Pin Aztec 1397","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Aztec 1397\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eRolling Pin - Aztec\u003c\/p\u003e\n\n\u003cp\u003eTextured rollers capable of impressing a continuous repeated pattern on clay and putties. Made from clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in different textures that you can buy based on your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inch)\u003c\/p\u003e\n\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface to be textured. For optimal results, ensure you have a smooth and even surface before impressing with the rollers. \u003cstrong\u003eWe recommend using a regular roller for this purpose.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the roller to prevent sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying equal pressure at all points for an even texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut off any excess putty\/clay with a sharp knife. It is recommended to do this after it has dried to prevent deformations in the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\n\u003cp\u003eThere are numerous different types of putty and clay on the market and all of them can be textured with the correct technique.\u003c\/p\u003e\n\n\u003cp\u003eUsually, polymer clay (Fimo or Sculpey type) is quite easy to work with these rolling pins, as they allow for easy correction of mistakes before baking. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly onto an MDF base and then place everything, including the base, in the oven. The cooking time for these clays is approximately 15 minutes at 150ºC. MDF wood may leave a slight smell, similar to that of toasted bread, but don't worry, it won't burn!\u003c\/p\u003e\n\n\u003cp\u003eIn the case of epoxy putties, there are different techniques that yield similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic surfaces.\u003c\/p\u003e\n\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to slightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\n\u003cp\u003eOther epoxy putties such as, for example, Milliput putty are also suitable, but we recommend not to over-wet them as this will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFor this type of epoxy putties, it is very important to clean the rollers thoroughly after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\n\u003cp\u003eAfter working with the rollers, use a scratch brush (LINK) and plenty of water to remove any residue on the rollers, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\n\u003cp\u003eTo ensure safety, children should be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222457508170,"sku":"GSW1397","price":12.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/1397-rolling-pin-aztec-1.webp?v=1772304835"},{"product_id":"rolling-pin-egyptian-1375","title":"Rolling Pin Egyptian 1375","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Egyptian 1375\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eRolling Pin - Egyptian\u003c\/p\u003e\n\n\u003cp\u003eTextured rollers capable of imprinting a continuous repeating pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in various textures that you can purchase based on your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inch)\u003c\/p\u003e\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready, following the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface to be textured. For optimal results, ensure you have a smooth and even surface before impressing with the rollers. \u003cstrong\u003eWe recommend using a plain roller for this purpose.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the roller to prevent sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying equal pressure at all points for an even texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut away excess putty\/clay with a sharp knife. It is recommended to do this after it has dried to prevent distortions in the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\u003cp\u003eThere are numerous different types of putties and clays on the market, and all can be textured with the proper technique.\u003c\/p\u003e\n\n\u003cp\u003eTypically, polymer clays (Fimo or Sculpey type) are quite easy to work with these rolling pins, as they allow for easy correction of mistakes before baking. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly onto an MDF base and then place everything, including the base, into the oven. The cooking time for these clays is approximately 15 minutes at 150ºC. MDF wood may leave a slight odor, similar to toasted bread, but don't worry, it will not burn!\u003c\/p\u003e\n\n\u003cp\u003eIn the case of epoxy putties, there are various techniques that yield similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic substrates.\u003c\/p\u003e\n\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to slightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\n\u003cp\u003eOther epoxy putties like Milliput putty, for example, are also suitable, but we recommend not wetting them too much as this hinders your work. Moreover, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFor this type of epoxy putties, it is very important to clean the rollers thoroughly after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\u003cp\u003eAfter working with the rollers, use a scratch brush (LINK) and plenty of water to remove any residue from the rollers, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\u003cp\u003eTo ensure safety, children should be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222457573706,"sku":"GSW1375","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/1375-rolling-pin-egyptian-1.webp?v=1772304835"},{"product_id":"rolling-pin-factory-ground-1224","title":"Rolling Pin Factory Ground 1224","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Factory Ground 1224\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eRolling Pin - Factory Floor\u003c\/p\u003e\n\n\u003cp\u003eTextured rollers capable of printing a continuous repeating pattern on clay and putty. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in a variety of textures that you can purchase according to your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14.50 cm (5.5 inches)\u003c\/p\u003e\n\n\u003cp\u003eDiameter: 2.5 cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface to be textured. For optimal results, ensure you have a smooth and even surface before impressing with the rollers. *** We recommend using a regular roller for this purpose.\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the roller to prevent sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying equal pressure at all points for an even texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut away excess putty\/clay with a sharp knife. It is recommended to do this after it has dried to prevent deformations in the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\n\u003cp\u003eThere are numerous different types of putty and clay on the market, and all of them can be textured with the correct technique.\u003c\/p\u003e\n\n\u003cp\u003eUsually, polymer clay (Fimo or Sculpey type) is quite easy to work with these rolling pins, as they allow for easy correction of mistakes before baking. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly onto an MDF base and then place everything, including the base, into the oven. The cooking time for these clays is approximately 15 minutes at 150ºC. MDF wood may leave a slight odor, similar to toasted bread, but don't worry, it will not burn!\u003c\/p\u003e\n\n\u003cp\u003eIn the case of epoxy putties, there are various techniques that yield similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic surfaces.\u003c\/p\u003e\n\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to lightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\n\u003cp\u003eOther epoxy putties such as, for example, Milliput putty are also suitable, but we recommend not wetting them too much as this will hinder your work. Moreover, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone.\u003c\/p\u003e\n\n\u003cp\u003e*** For these types of epoxy putties, it is very important to clean the rollers thoroughly after use.\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\n\u003cp\u003eAfter working with the rollers, use a scratch brush (LINK) and plenty of water to remove any residue on the rollers, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\n\u003cp\u003eTo ensure safety, children should be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222457737546,"sku":"GSW1224","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/1224-rolling-pin-hobby-roller-factory-ground-1.webp?v=1772304837"},{"product_id":"rolling-pin-celtic-1223","title":"Rolling Pin Celtic 1223","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Celtic 1223\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eRolling Pin - Celtic\u003c\/p\u003e\n\n\u003cp\u003eTextured rollers capable of imprinting a continuous repeated pattern on clay and putty. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in different textures that you can buy based on your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inch)\u003c\/p\u003e\n\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay onto a surface that needs to be textured. For optimal results, ensure you have a smooth and even surface before imprinting with the rollers. \u003cstrong\u003eWe recommend using a plain roller for this.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the roller to prevent sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying equal pressure at all points for an even texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut away excess putty\/clay with a sharp blade. It is recommended to do this after it has dried to prevent deformations in the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\n\u003cp\u003eThere are numerous different types of putty and clay on the market, and all of them can be textured with the right technique.\u003c\/p\u003e\n\n\u003cp\u003eTypically, polymer clay (Fimo or Sculpey type) is quite easy to work with these rolling pins, as they allow for easy correction of mistakes before baking. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly onto an MDF base and then place everything into the oven, including the base. The cooking time for these clays is approximately 15 minutes at 150ºC. MDF wood may leave a slight smell, similar to toasted bread, but don't worry, it will not burn!\u003c\/p\u003e\n\n\u003cp\u003eIn the case of epoxy putties, there are several techniques that yield similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic surfaces.\u003c\/p\u003e\n\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to lightly wet the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\n\u003cp\u003eOther epoxy putties such as, for example, Milliput putty are also suitable, but we recommend not making them too wet as this will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness disappears.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFor this type of epoxy putties, it is very important to clean the rollers thoroughly after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\n\u003cp\u003eAfter working with the rollers, use a scratch brush (LINK) and plenty of water to remove any residues on the rollers, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\n\u003cp\u003eTo ensure safety, children should be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222457770314,"sku":"GSW1223","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/1223-rolling-pin-hobby-roller-celtic-1.webp?v=1772304839"},{"product_id":"rolling-pin-greek-1337","title":"Rolling Pin Greek 1337","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Greek 1337\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eRolling Pin - Greek\u003c\/p\u003e\n\n\u003cp\u003eTextured rollers that are able to print a continuous repeated pattern on clay and putty. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several textures you can buy according to your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inches)\u003c\/p\u003e\n\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface that needs to be textured. For optimal results, ensure you have a smooth and even surface before making an impression with the rollers. \u003cstrong\u003eWe recommend using a regular roller for this purpose.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the roller to prevent sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying equal pressure at all points for an even texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut away excess putty\/clay with a sharp knife. It is recommended to do this after it has dried to prevent deformation of the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\n\u003cp\u003eThere are numerous different types of putty and clay on the market, and all of them can be textured with the right technique.\u003c\/p\u003e\n\n\u003cp\u003eTypically, polymer clay (Fimo or Sculpey type) is quite easy to work with these rolling pins, as they allow for easy correction of mistakes before baking. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly onto an MDF base and then place everything, including the base, into the oven. The cooking time for these clays is approximately 15 minutes at 150ºC. MDF wood may leave a slight odor, similar to toasted bread, but don't worry, it won't burn!\u003c\/p\u003e\n\n\u003cp\u003eIn the case of epoxy putties, there are various techniques that yield similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic surfaces.\u003c\/p\u003e\n\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to lightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\n\u003cp\u003eOther epoxy putties like Milliput putty, for example, are also suitable, but we advise against making them too wet as this will hinder your work. Moreover, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFor this type of epoxy putties, it is very important to clean the rollers thoroughly after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\n\u003cp\u003eAfter working with the rollers, use a scratch brush (LINK) and plenty of water to remove any residue from the rollers, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\n\u003cp\u003eTo ensure safety, children must be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222458032458,"sku":"GSW1337","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/1337-rolling-pin-greek-1.webp?v=1772304845"},{"product_id":"rolling-pin-plain-1159-roller-glad","title":"Rolling Pin Plain 1159 Roller Smooth","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Plain 1159\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eRolling Pin - Smooth\u003c\/p\u003e\n\n\u003cp\u003eSmooth rolling pins that can flatten putty, Fimo, and other modeling clay. Made from clear PMMA plastic with fantastic non-stick properties. Non-toxic.\u003c\/p\u003e\n\n\u003cul\u003e\n    \u003cli\u003eLength: 14'50 cm (5’5 inches)\u003c\/li\u003e\n    \u003cli\u003eDiameter: 2’5cm (1 inch)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eIt is particularly useful for making thin and even surfaces such us flags, cloths, cloaks, etc...\u003c\/p\u003e\n\n\u003cp\u003eIf you are flattening Green Stuff Putty, we recommend you use talcum powder and some water to moisten the putty and the Rolling Pin to achieve amazing thin and smooth surfaces. The talcum powder also allows you to touch the Green Stuff without leaving any fingerprints.\u003c\/p\u003e\n\n\u003ch3\u003eCARE INSTRUCTIONS:\u003c\/h3\u003e\n\n\u003cp\u003eAfter working with the Rolling Pins, use a Scratch Brush and plenty of water to clean off any residue on the Rolling Pins if required.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\n\u003cp\u003eTo ensure safety, children should be closely monitored by a responsible adult.\u003c\/p\u003e\n\n\u003ch3\u003eCARE INSTRUCTIONS:\u003c\/h3\u003e\n\n\u003cp\u003eAfter working with the rollers, use a scratch brush and plenty of water to remove any residue from the rollers, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\n\u003cp\u003eTo ensure safety, children should be closely monitored by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222458065226,"sku":"GSW1159","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/1159-rolling-pin-plain-smooth-25mm-1.webp?v=1772304843"},{"product_id":"rolling-pin-cobblestone-1163","title":"Rolling Pin Cobblestone 1163","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Cobblestone 1163\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTextured rollers that are capable of printing a continuous repeated pattern on clay and putty. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in a variety of textures you can purchase according to your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inches)\u003c\/p\u003e\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface to be textured. For optimal results, ensure you have a smooth and even surface before impressing with the rollers. \u003cstrong\u003eWe recommend using a regular roller for this purpose.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the roller to prevent sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Slowly move the rolling pin, applying equal pressure at all points for a uniform texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut away excess putty\/clay with a sharp knife. It is recommended to do this after it has dried to avoid deformations in the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\u003cp\u003eThere are many different types of putty and clay on the market, and all of them can be textured with the right technique.\u003c\/p\u003e\n\u003cp\u003eUsually, polymer clay (Fimo or Sculpey type) is quite easy to work with these rolling pins, as they allow for easy correction of errors before baking. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly onto an MDF base and then place everything in the oven, including the base. The cooking time for these clays is approximately 15 minutes at 150ºC. MDF wood may leave a slight smell, similar to that of toasted bread, but don't worry, it won't burn!\u003c\/p\u003e\n\u003cp\u003eIn the case of epoxy putties, there are different techniques that yield similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic surfaces.\u003c\/p\u003e\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to lightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\u003cp\u003eOther epoxy putties such as Milliput putty are also suitable, but we advise against making them too wet as this will hinder your work. Moreover, if the mixture is too sticky, it is better to knead it until the stickiness disappears.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor this type of epoxy putties, it is very important to clean the rollers thoroughly after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\u003cp\u003eAfter working with the rollers, use a scratch brush (LINK) and plenty of water to remove any residue from the rollers, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\u003cp\u003eTo ensure safety, children should be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222458720586,"sku":"GSW1163","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/1163-rolling-pin-hobby-roller-cobblestone-1.webp?v=1772304859"},{"product_id":"rolling-pin-madness-of-cthulhu-1604","title":"Rolling Pin Madness of Cthulhu 1604","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Cobblestone 1163\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTextured rollers capable of imprinting a continuous repeated pattern on clay and putty. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in various textures that you can buy according to your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inch)\u003c\/p\u003e\n\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003e1st - Knead the putty\/clay well until ready according to the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface to be textured. For optimal results, ensure you have a smooth and even surface before imprinting with the rollers. \u003cstrong\u003eWe recommend using a regular roller for this purpose.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the roller to prevent sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying equal pressure at all points for an even texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut away excess putty\/clay with a sharp knife. It is recommended to do this after it has dried to prevent distortions in the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\n\u003cp\u003eThere are many different types of putty and clay on the market, and all of them can be textured with the right technique.\u003c\/p\u003e\n\n\u003cp\u003eUsually, polymer clay (Fimo or Sculpey type) is quite easy to work with these rolling pins, as they allow for easy correction of mistakes before baking. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly on an MDF base and then place everything in the oven, including the base. The cooking time for these clays is approximately 15 minutes at 150ºC. MDF wood may leave a slight odor, similar to toasted bread, but don't worry, it won't burn!\u003c\/p\u003e\n\n\u003cp\u003eIn the case of epoxy putties, there are different techniques that yield similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic substrates.\u003c\/p\u003e\n\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to lightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\n\u003cp\u003eOther epoxy putties such as Milliput putty are also suitable, but we recommend not to wet them too much as this will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFor this type of epoxy putties, it is very important to clean the rollers thoroughly after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\n\u003cp\u003eAfter working with the rollers, use a scratch brush (LINK) and plenty of water to remove any residue on the rollers, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\n\u003cp\u003eTo ensure safety, children should be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222458818890,"sku":"GSW1604","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/1604-rolling-pin-madness-of-cthulhu-1.webp?v=1772304861"},{"product_id":"rolling-pin-tank-tracks-2304","title":"Rolling Pin Tank Tracks 2304","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin TANK TRACKS 2304\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTextured rollers capable of imprinting a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in a variety of textures for you to buy based on your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inches)\u003c\/p\u003e\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface that needs to be textured. To ensure optimal results, make sure you have a smooth and even surface before impressing with the rollers. \u003cstrong\u003eWe recommend using a plain rolling pin for this.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the roller to prevent sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying equal pressure at all points for an even texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut away any excess putty\/clay with a sharp blade. It is recommended to do this after it has dried to prevent distortions in the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\u003cp\u003eThere are a ton of different kinds of putties and clays in the market, and all of them can be textured using the right technique.\u003c\/p\u003e\n\u003cp\u003eUsually, polymer clay (Fimo or Sculpey type) is quite easy to work with these rolling pins, as they allow for easy correction of mistakes before baking. If the intention is to make a textured base, we recommend using an MDF base, as you can texture the polymer clay directly on an MDF base and then place everything in the oven, including the base. The cooking time for these clays is approximately 15 minutes at 150ºC. MDF wood might leave a slight smell, similar to that of toasted bread, but don't worry, it won't burn!\u003c\/p\u003e\n\u003cp\u003eIn the case of epoxy putties, there are different techniques that will achieve similar results. The good thing is, you don't need to bake them, so they can be applied directly onto plastic bases.\u003c\/p\u003e\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to slightly moisten the putty or the roller with some water before texturing. You can also reduce its stickiness by applying talcum powder or by using Sculptor Vaseline.\u003c\/p\u003e\n\u003cp\u003eOther epoxy putties such as Milliput putty, for example, are also suitable, but we recommend not wetting them too much as this will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness disappears.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor these types of epoxy putties, it is very important to clean the rollers well after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\u003cp\u003eAfter working with the rollers, use a scratch brush (LINK) and plenty of water to remove any residue from the rollers, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\u003cp\u003eTo ensure safety, children must be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222458917194,"sku":"GSW2304","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/2304-rolling-pin-tank-tracks-1.webp?v=1772304858"},{"product_id":"rolling-pin-small-dutch-bricks-1660","title":"Rolling Pin Small DUTCH Bricks 1660","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Small DUTCH Bricks 1660\u003c\/strong\u003e Textured rollers capable of impressing a continuous repeated pattern on clay and putty.\u003c\/p\u003e\n\u003cp\u003eMade of clear PMMA plastic with amazing non-stick properties. Non-toxic.\u003c\/p\u003e\n\u003cp\u003eThey come in different textures that you can buy according to your specific needs. Length: 14'50 cm (5'5 inches) Diameter: 2'5cm (1 inch)\u003c\/p\u003e\n\u003cp\u003eRecommended Scales: 1\/35 - 1\/43 - 1\/48 - 1\/76\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINSTRUCTIONS FOR USE:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface to be textured. For optimum results, ensure you have a smooth and even surface before impressing with the rollers. *** We recommend using a regular roller for this.\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the roller to avoid sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying equal pressure at all points for an even texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut away excess putty\/clay with a sharp knife. It is recommended to do this after it has dried to prevent deformations in the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMATERIALS:\u003c\/strong\u003e There are numerous different types of putties and clays on the market, and all of them can be textured with the right technique. Usually, polymer clays (Fimo or Sculpey type) are quite easy to work with these rolling pins, as they allow easy correction of mistakes before baking. If the intention is to make a textured base, we recommend using an MDF base, as you can texture the polymer clay directly onto an MDF base and then place everything in the oven, including the base.\u003c\/p\u003e\n\u003cp\u003eThe cooking time for these clays is approximately 15 minutes at 150ºC. MDF wood may leave a slight odor, similar to toasted bread, but don't worry, it won't burn! In the case of epoxy putties, there are different techniques that yield similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic surfaces.\u003c\/p\u003e\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to slightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline. Other epoxy putties like Milliput putty, for example, are also suitable, but we recommend not to make them too wet as this will hinder your work. Furthermore, if the mixture is too sticky, it is better to knead it until the stickiness is gone.\u003c\/p\u003e\n\u003cp\u003e*** For this type of epoxy putties, it is very important to clean the rollers well after use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMAINTENANCE INSTRUCTIONS:\u003c\/strong\u003e After working with the rollers, use a scratch brush (LINK) and plenty of water to remove any residue on the rollers, if necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAFETY:\u003c\/strong\u003e To ensure safety, children must be closely monitored by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222458949962,"sku":"GSW1660","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/1660-1rolling-pin-small-dutch-bricks.jpg?v=1775677479"},{"product_id":"rolling-pin-alien-hive-1664","title":"Rolling Pin Alien Hive 1664","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Alien Hive 1664\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTextured rolling pins capable of pressing a continuous repeated pattern on clay and putty. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in a variety of textures that you can purchase based on your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inch)\u003c\/p\u003e\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface to be textured. For optimal results, ensure you have a smooth and even surface before impressing with the rolling pins. \u003cstrong\u003eWe recommend using a plain roller for this.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the rolling pin to prevent sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying equal pressure at all points for an even texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut away excess putty\/clay with a sharp knife. It is recommended to do this after it has dried to prevent deformation of the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\u003cp\u003eThere are many different types of putty and clay on the market, and all of them can be textured with the right technique.\u003c\/p\u003e\n\u003cp\u003eTypically, polymer clay (Fimo or Sculpey type) is quite easy to work with these rolling pins, as they allow for easy correction of mistakes before baking. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly onto an MDF base and then place everything in the oven, including the base. The baking time for these clays is approximately 15 minutes at 150ºC. MDF wood may leave a slight odor, similar to toasted bread, but don't worry, it will not burn!\u003c\/p\u003e\n\u003cp\u003eIn the case of epoxy putties, there are various techniques that yield similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic substrates.\u003c\/p\u003e\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to lightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\u003cp\u003eOther epoxy putties such as Milliput putty are also suitable, but we recommend not to wet them too much as this will hinder your work. Moreover, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor this type of epoxy putties, it is very important to clean the rolling pins thoroughly after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\u003cp\u003eAfter working with the rolling pins, use a scratch brush (LINK) and plenty of water to remove any residue from the rolling pins, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\u003cp\u003eTo ensure safety, children should be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222459408714,"sku":"GSW1664","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/1664-rolling-pin-alien-hive-1.webp?v=1772304867"},{"product_id":"rolling-pin-flagstone-1676","title":"Rolling Pin Flagstone 1676","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Flagstone 1676\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTextured rolling pins capable of imprinting a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several textures that you can buy according to your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inch)\u003c\/p\u003e\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e1st - Knead the putty\/clay well until ready according to the manufacturer’s recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface to be textured. For optimum results, ensure you have a smooth and even surface before imprinting with the rollers. \u003cstrong\u003eWe recommend using a plain roller for this.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to moisten the roller to prevent sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying equal pressure at all points for an even texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Trim off excess putty\/clay with a sharp knife. It is recommended to do this after it has dried to avoid deforming the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\u003cp\u003eThere are numerous different types of putty and clay on the market, and all of them can be textured with the correct technique.\u003c\/p\u003e\n\u003cp\u003eUsually, polymer clay (Fimo or Sculpey type) is quite easy to work with these rolling pins, as they allow for easy correction of errors before baking. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly on an MDF base and then place everything in the oven, including the base. The cooking time for these clays is about 15 minutes at 150ºC. MDF wood may leave a slight smell, similar to toasted bread, but don't worry, it will not burn!\u003c\/p\u003e\n\u003cp\u003eIn the case of epoxy putties, there are several techniques that achieve similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic bases.\u003c\/p\u003e\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to slightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\u003cp\u003eOther epoxy putties like Milliput putty, for example, are also suitable, but we recommend not wetting them too much as this will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor these types of epoxy putties, it is very important to clean the rollers thoroughly after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\u003cp\u003eAfter working with the rollers, use a scratch brush (LINK) and plenty of water to remove any residue on the rollers, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\u003cp\u003eTo ensure safety, children must be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222459998538,"sku":"GSW1676","price":12.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/1676-rolling-pin-flagstone-1.webp?v=1772304867"},{"product_id":"rolling-pin-herringbone-1675","title":"Rolling Pin Herringbone 1675","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Herringbone 1675\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTextured rolling pins capable of imprinting a continuous repeated pattern on clay and putty. Made from clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in various textures that you can buy based on your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inch)\u003c\/p\u003e\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface to be textured. For optimal results, ensure you have a smooth and even surface before impressing with the rollers. \u003cstrong\u003eWe recommend using a plain roller for this.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to moisten the roller to prevent sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying equal pressure at all points for an even texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut away excess putty\/clay with a sharp knife. It is recommended to do this after it has dried to avoid deformations in the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\u003cp\u003eThere are a multitude of different types of putty and clay on the market, and all of them can be textured with the right technique.\u003c\/p\u003e\n\u003cp\u003eTypically, polymer clay (Fimo or Sculpey type) is quite easy to work with these rolling pins, as they allow for easy correction of mistakes before baking. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly onto an MDF base and then place everything in the oven, including the base. The cooking time for these clays is approximately 15 minutes at 150ºC. MDF wood may leave a slight odor, similar to that of toasted bread, but don't worry, it will not burn!\u003c\/p\u003e\n\u003cp\u003eIn the case of epoxy putties, there are various techniques that yield similar results. The good thing is, you don't have to bake them, so they can be applied directly to plastic surfaces.\u003c\/p\u003e\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to lightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\u003cp\u003eOther epoxy putties such as Milliput putty, for example, are also suitable, but we recommend not wetting them too much as this will hinder your work. Moreover, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor these types of epoxy putties, it is very important to clean the rollers thoroughly after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\u003cp\u003eAfter working with the rollers, use a scratch brush (LINK) and plenty of water to remove any residue on the rollers, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\u003cp\u003eTo ensure safety, children should be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222460031306,"sku":"GSW1675","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/1675-rolling-pin-herringbone-1.webp?v=1772304869"},{"product_id":"rolling-pin-arcane-3411","title":"Rolling Pin Arcane 3411","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Arcane 3411\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTextured rolling pins capable of impressing a continuous repeated pattern on clay and putty. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several textures that you can buy according to your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inch)\u003c\/p\u003e\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface to be textured. For optimum results, ensure you have a smooth and even surface before impressing with the rollers. \u003cstrong\u003eWe recommend using a regular roller for this purpose.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to moisten the roller to prevent sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying equal pressure at all points for a uniform texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut off any excess putty\/clay with a sharp blade. It is recommended to do this after it has dried to prevent distortion of the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\u003cp\u003eThere are numerous types of putty and clay on the market, and all of them can be textured with the proper technique.\u003c\/p\u003e\n\u003cp\u003eTypically, polymer clays (Fimo or Sculpey type) are quite easy to work with these rolling pins, as they allow for easy correction of mistakes before baking. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly onto an MDF base and then place everything in the oven, including the base. The cooking time for these clays is about 15 minutes at 150ºC. MDF wood may leave a slight smell, similar to that of toasted bread, but don't worry, it will not burn!\u003c\/p\u003e\n\u003cp\u003eIn the case of epoxy putties, there are various techniques that yield similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic surfaces.\u003c\/p\u003e\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to slightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\u003cp\u003eOther epoxy putties such as Milliput putty, for example, are also suitable, but we recommend not over-wetting them as this will hinder your work. Additionally, if the mixture is too sticky, it is better to continue kneading until the stickiness disappears.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor this type of epoxy putty, it is very important to clean the rollers thoroughly after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\u003cp\u003eAfter working with the rollers, use a scratch brush (LINK) and plenty of water to remove any residue on the rollers, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\u003cp\u003eTo ensure safety, children should be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222460064074,"sku":"GSW3411","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/3411-rolling-pin-arcane-1.webp?v=1772304869"},{"product_id":"rolling-pin-steampunk-2190","title":"Rolling Pin STEAMPUNK 2190","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin STEAMPUNK 2190\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTextured rollers that are able to print a continuous repeated pattern on clay and putty. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in various textures that you can buy according to your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inch)\u003c\/p\u003e\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready, following the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface to be textured. For optimal results, ensure you have a smooth and even surface before making impressions with the rollers. *** We recommend using a plain roller for this.\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to moisten the roller to prevent sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying even pressure at all points for a uniform texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut away excess putty\/clay with a sharp knife. It is recommended to do this after it has dried to prevent distortion of the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\u003cp\u003eThere are numerous different types of putty and clay on the market, and all of them can be textured with the right technique.\u003c\/p\u003e\n\u003cp\u003eTypically, polymer clay (Fimo or Sculpey type) is quite easy to work with these rolling pins, as they allow for easy correction of mistakes before baking. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly onto an MDF base and then place everything into the oven, including the base. The cooking time for these clays is about 15 minutes at 150ºC. MDF wood may leave a slight odor, similar to that of toasted bread, but don't worry, it won't burn!\u003c\/p\u003e\n\u003cp\u003eIn the case of epoxy putties, there are different techniques that yield similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic substrates.\u003c\/p\u003e\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to slightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\u003cp\u003eOther epoxy putties like Milliput putty are also suitable, but we advise against making them too wet as this will hinder your work. Moreover, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone.\u003c\/p\u003e\n\u003cp\u003e*** For this type of epoxy putties, it is very important to clean the rollers thoroughly after use.\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\u003cp\u003eAfter working with the rollers, use a scratch brush (LINK) and plenty of water to remove any residue on the rollers, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\u003cp\u003eTo ensure safety, children should be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222460424522,"sku":"GSW2190","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/2190-rolling-pin-steampunk-1.webp?v=1772304875"},{"product_id":"rolling-pin-norsemen-3410","title":"Rolling Pin Norsemen 3410","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Norsemen 3410\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTextured rolling pins capable of printing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in different textures that you can buy according to your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inch)\u003c\/p\u003e\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface to be textured. To ensure optimum results, ensure you have a smooth and even surface before impressing with the rollers. \u003cstrong\u003eWe recommend using a plain roller for this purpose.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the roller to prevent sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly and apply equal pressure at all points for a uniform texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut away excess putty\/clay with a sharp blade. It is recommended to do this after it has dried to prevent distortion of the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\u003cp\u003eThere are numerous different types of putties and clays on the market, and all of them can be textured with the right technique.\u003c\/p\u003e\n\u003cp\u003eNormally, polymer clay (Fimo or Sculpey type) is quite easy to work with these rolling pins, as they allow for easy correction of errors before baking. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly onto an MDF base and then place everything in the oven, including the base. The cooking time for these clays is approximately 15 minutes at 150ºC. MDF wood may leave a slight odor, similar to that of toasted bread, but don't worry, it won't burn!\u003c\/p\u003e\n\u003cp\u003eIn the case of epoxy putties, there are different techniques that yield similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic bases.\u003c\/p\u003e\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to lightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\u003cp\u003eOther epoxy putties such as Milliput putty, for example, are also suitable, but we recommend not to wet them too much as this will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness disappears.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor this type of epoxy putties, it is very important to clean the rollers thoroughly after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\u003cp\u003eAfter working with the rollers, use a scratch brush (LINK) and plenty of water to remove any residue on the rollers, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\u003cp\u003eTo ensure safety, children must be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222460457290,"sku":"GSW3410","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/3410-rolling-pin-norsemen-1.webp?v=1772304875"},{"product_id":"rolling-pin-tau-1682","title":"Rolling Pin TAU 1682","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin TAU 1682\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTextured rolling pins capable of printing a continuous repeated pattern on clay and putty. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in different textures that you can buy according to your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inch)\u003c\/p\u003e\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface to be textured. For optimum results, ensure you have a smooth and even surface before impressing with the rollers. \u003cstrong\u003eWe recommend using a plain roller for this.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the roller to prevent sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying equal pressure at all points for an even texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut away excess putty\/clay with a sharp knife. It is recommended to do this after it has dried to prevent distortion of the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\u003cp\u003eThere are many different types of putty and clay on the market and all of them can be textured with the correct technique.\u003c\/p\u003e\n\u003cp\u003eTypically, polymer clay (Fimo or Sculpey type) is quite easy to work with these rolling pins, as they allow for easy correction of mistakes before baking. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly on an MDF base and then place everything in the oven, including the base. The cooking time for these clays is about 15 minutes at 150ºC. MDF wood may leave a slight odor, similar to toasted bread, but don't worry, it won't burn!\u003c\/p\u003e\n\u003cp\u003eIn the case of epoxy putties, there are different techniques that produce similar results. The good thing is, you don't have to bake them, so they can be applied directly to plastic substrates.\u003c\/p\u003e\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to slightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\u003cp\u003eOther epoxy putties such as Milliput putty are also suitable, but we recommend not wetting them too much as this will hinder your work. Moreover, if the mixture is too sticky, it is better to knead until the stickiness disappears.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor this type of epoxy putties, it is very important to clean the rollers thoroughly after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\u003cp\u003eAfter working with the rollers, use a scratch brush (LINK) and plenty of water to remove any residue on the rollers, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\u003cp\u003eTo ensure safety, children should be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222460817738,"sku":"GSW1682","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/1682-rolling-pin-tau-1.webp?v=1772304879"},{"product_id":"rolling-pin-regio-draco-2986","title":"Rolling Pin Regio Draco 2986","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Regio Draco 2986\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTextured rolling pins capable of imprinting a continuous repeated pattern on clay and putty. Made from clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in a variety of textures you can acquire based on your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inch)\u003c\/p\u003e\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay onto a surface that needs to be textured. For optimal results, ensure you have a smooth and even surface before imprinting with the rolling pins. \u003cstrong\u003eWe recommend using a plain roller for this purpose.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the roller to prevent sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying equal pressure at all points for an even texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut away any excess putty\/clay with a sharp knife. It is recommended to do this after it has dried to prevent deformations in the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\u003cp\u003eThere are many different types of putty and clay on the market, and all of them can be textured with the proper technique.\u003c\/p\u003e\n\u003cp\u003eUsually, polymer clay (Fimo or Sculpey type) is quite easy to work with these rolling pins, as they allow for easy correction of mistakes before baking. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly onto an MDF base and then place everything in the oven, including the base. The cooking time for these clays is about 15 minutes at 150ºC. MDF wood may leave a slight odor, similar to that of toasted bread, but don't worry, it won't burn!\u003c\/p\u003e\n\u003cp\u003eIn the case of epoxy putties, there are various techniques that yield similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic bases.\u003c\/p\u003e\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is necessary to slightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\u003cp\u003eOther epoxy putties such as, for example, Milliput putty are also suitable, but we recommend not to make them too wet as this will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness has disappeared.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor this type of epoxy putties, it is very important to clean the rolling pins thoroughly after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\u003cp\u003eAfter working with the rolling pins, use a scratch brush (LINK) and plenty of water to remove any residue from the rolling pins, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\u003cp\u003eTo ensure safety, children should be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222460850506,"sku":"GSW2986","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/2986-rolling-pin-regio-draco-1.webp?v=1772304877"},{"product_id":"rolling-pin-templar-abbey-2987","title":"Rolling Pin Templar Abbey 2987","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Templar Abbey 2987\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTextured rollers able to impress a continuous repeated pattern on clay and putty. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in different textures that you can buy according to your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inch)\u003c\/p\u003e\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e1st - Knead the putty\/clay properly until ready according to the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Extend the putty\/clay on a surface that needs to be textured. For optimum results, ensure you have a smooth and even surface before impressing with the rollers. \u003cstrong\u003eWe recommend using a plain roller for this.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the roller to avoid sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying equal pressure at all points for a uniform texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut away excess putty\/clay with a sharp knife. It is recommended to do this after it has dried to prevent distortion of the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\u003cp\u003eThere are many different types of putty and clay on the market and all of them can be textured with the right technique.\u003c\/p\u003e\n\u003cp\u003eUsually, polymer clays (Fimo or Sculpey type) are quite easy to work with these rolling pins, as they allow for easy correction of mistakes before baking. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly onto an MDF base and then place everything in the oven, including the base. The cooking time for these clays is approximately 15 minutes at 150ºC. MDF wood may leave a slight odor, similar to that of roasted bread, but don't worry, it won't burn!\u003c\/p\u003e\n\u003cp\u003eIn the case of epoxy putties, there are several techniques that achieve similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic surfaces.\u003c\/p\u003e\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to lightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\u003cp\u003eOther epoxy putties such as Milliput putty are also suitable, but we recommend not wetting them too much as this will hinder your work. In addition, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor this type of epoxy putties, it is very important to clean the rollers thoroughly after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\u003cp\u003eAfter working with the rollers, use a scratch brush (LINK) and plenty of water to remove any residue on the rollers, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\u003cp\u003eTo ensure safety, children should be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222461047114,"sku":"GSW2987","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/2987-rolling-pin-templar-abbey-1.webp?v=1772304883"},{"product_id":"rolling-pin-necronic-1681","title":"Rolling Pin NECRONIC 1681","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin NECRONIC 1681\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTextured rollers capable of impressing a continuous repeated pattern on clay and putty. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in different textures that you can acquire according to your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inch)\u003c\/p\u003e\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to the manufacturer’s recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread out the putty\/clay on a surface to be textured. For optimum results, ensure you have a smooth and even surface before impressing with the rollers. \u003cstrong\u003eWe recommend using a plain roller for this.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the roller to avoid sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly and exert equal pressure at all points for an even texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut away excess putty\/clay with a sharp blade. It is recommended to do this after it has dried to prevent distortions in the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\u003cp\u003eThere are a multitude of different types of putty and clay on the market, and all of them can be textured with the right technique.\u003c\/p\u003e\n\u003cp\u003eUsually, polymer clays (Fimo or Sculpey type) are quite easy to work with these rolling pins, as they allow for easy correction of mistakes before baking. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly on an MDF base and then place everything into the oven, including the base. The cooking time for these clays is approximately 15 minutes at 150ºC. MDF wood may leave a slight odor, similar to toasted bread, but don't worry, it will not burn!\u003c\/p\u003e\n\u003cp\u003eIn the case of epoxy putties, there are different techniques that achieve similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic bases.\u003c\/p\u003e\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to lightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\u003cp\u003eOther epoxy putties such as, for example, Milliput putty are also suitable, but we recommend not wetting them excessively as this will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness disappears.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor this type of epoxy putties, it is very important to clean the rollers thoroughly after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\u003cp\u003eAfter working with the rollers, use a scratch brush (LINK) and plenty of water to remove any residue on the rollers, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\u003cp\u003eTo ensure safety, children must be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222461178186,"sku":"GSW1681","price":12.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/1681-rolling-pin-necronic-1.webp?v=1772304884"},{"product_id":"rolling-pin-eldar-1683","title":"Rolling Pin ELDAR 1683","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin ELDAR 1683\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTextured rolling pins capable of impressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in different textures that you can buy according to your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inch)\u003c\/p\u003e\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface to be textured. For optimal results, ensure you have a smooth and even surface before impressing with the rolling pins. \u003cstrong\u003eWe recommend using a regular rolling pin for this.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the rolling pin to avoid sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying equal pressure at all points for an even texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut away excess putty\/clay with a sharp blade. It is recommended to do this after it has dried to avoid deformations in the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\u003cp\u003eThere are many different types of putty and clay on the market, and all of them can be textured with the right technique.\u003c\/p\u003e\n\u003cp\u003eNormally, polymer clays (Fimo or Sculpey type) are quite easy to work with these rolling pins, as they allow for easy correction of errors before baking. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly onto an MDF base and then place everything in the oven, including the base. The cooking time for these clays is about 15 minutes at 150ºC. MDF wood may leave a slight odor, similar to that of toasted bread, but don't worry, it won't burn!\u003c\/p\u003e\n\u003cp\u003eIn the case of epoxy putties, there are several techniques that yield similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic bases.\u003c\/p\u003e\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to lightly moisten the putty or the rolling pin with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\u003cp\u003eOther epoxy putties such as Milliput putty are also suitable, but we recommend not wetting them too much as this will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor this type of epoxy putties, it is very important to clean the rolling pins thoroughly after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\u003cp\u003eAfter working with the rolling pins, use a scrubbing brush (LINK) and plenty of water to remove any residue on the rolling pins, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\u003cp\u003eTo ensure safety, children should be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222461342026,"sku":"GSW1683","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/1683-rolling-pin-eldar-1.webp?v=1772304885"},{"product_id":"rolling-pin-dwarven-2386","title":"Rolling Pin DWARVEN 2386","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin DWARVEN 2386\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTextured rollers capable of impressing a continuous repeated pattern on clay and putty. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in different textures that you can purchase based on your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inches)\u003c\/p\u003e\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface that is going to be textured. For an optimal result, make sure you have a smooth and even surface before impressing with the rollers. \u003cstrong\u003eWe recommend using a plain roller for this.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the roller to prevent sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying equal pressure at all points for an even texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut off excess putty\/clay with a sharp knife. It is recommended to do this after it has dried to avoid deformations in the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\u003cp\u003eThere are numerous different types of putty and clay on the market, and all of them can be textured with the correct technique.\u003c\/p\u003e\n\u003cp\u003eTypically, polymer clays (Fimo or Sculpey type) are quite easy to work with these rolling pins, as they allow for easy correction of mistakes before baking. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly on an MDF base and then place everything in the oven, including the base. The cooking time for these clays is about 15 minutes at 150ºC. MDF wood may leave a slight smell, similar to toasted bread, but don't worry, it won't burn!\u003c\/p\u003e\n\u003cp\u003eIn the case of epoxy putties, there are different techniques that yield similar results. The good thing is, you don't have to bake them, so they can be applied directly to plastic surfaces.\u003c\/p\u003e\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to lightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\u003cp\u003eOther epoxy putties such as Milliput putty are also suitable, but we recommend not wetting them too much as this will hinder your work. Additionally, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor this type of epoxy putties, it is very important to clean the rollers thoroughly after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\u003cp\u003eAfter working with the rollers, use a scratch brush (LINK) and plenty of water to remove any residue on the rollers, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\u003cp\u003eTo ensure safety, children should be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222461440330,"sku":"GSW2386","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/2386-rolling-pin-dwarven-1.webp?v=1772304886"},{"product_id":"rolling-pin-elven-2387","title":"Rolling Pin ELVEN 2387","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin ELVEN 2387\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTextured rolling pins capable of impressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in different textures that you can buy according to your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inch)\u003c\/p\u003e\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface that needs to be textured. For optimum results ensure you have a smooth and even surface before impressing with the rolling pins. \u003cstrong\u003eWe recommend using a plain roller for this.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the rolling pin to avoid sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, exerting equal pressure at all points for an even texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Trim off excess putty\/clay with a sharp blade. It is recommended to do this after it has dried to avoid deformations in the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\u003cp\u003eThere are numerous different types of putties and clays on the market, and all of them can be textured with the right technique.\u003c\/p\u003e\n\u003cp\u003eUsually, polymer clay (Fimo or Sculpey type) is quite easy to work with these rolling pins, as they allow easy correction of mistakes before baking. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly onto an MDF base and then place everything in the oven, including the base. The cooking time for these clays is approximately 15 minutes at 150ºC. MDF wood may give off a slight odor, similar to that of toasted bread, but don't worry, it won't burn!\u003c\/p\u003e\n\u003cp\u003eIn the case of epoxy putties, there are different techniques that yield similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic surfaces.\u003c\/p\u003e\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to slightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\u003cp\u003eOther epoxy putties such as, for example, Milliput putty are also suitable, but we recommend not to wet them too much as this will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor this type of epoxy putties, it is very important to clean the rolling pins thoroughly after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\u003cp\u003eAfter working with the rolling pins, use a scratch brush (LINK) and plenty of water to remove any residues on the rolling pins, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\u003cp\u003eTo ensure safety, children must be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222461800778,"sku":"GSW2387","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/2387-rolling-pin-elven-1.webp?v=1772304893"},{"product_id":"silicone-guide-rings-voor-rolling-pins-1444","title":"Silicone Guide Rings for Rolling Pins 1444","description":"\u003cp\u003e\u003cstrong\u003eSilicone Guide Rings for Rolling Pins 1444\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe quick and easy way to ensure an even thickness of putty and clay when using rolling pins.\u003c\/p\u003e\n\n\u003cp\u003eSimply slide the rings of the desired putty or clay thickness onto both ends of the rolling pin and roll until the guide rings touch the work surface.\u003c\/p\u003e\n\n\u003cp\u003eWork with a 25 mm diameter rolling pin.\u003c\/p\u003e\n\n\u003ch3\u003eRing height:\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e2 mm\u003c\/li\u003e\n    \u003cli\u003e4 mm\u003c\/li\u003e\n    \u003cli\u003e5 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThis set contains a total of 3 pairs of silicone rings.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222467731786,"sku":"GSW1444","price":3.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/dc3a7560-1444-silicone-guide-rings-2.webp?v=1772398339"},{"product_id":"foamboard-5-mm-9318","title":"Foam board 5 mm 9318","description":"\u003cp\u003e\u003cstrong\u003eFoamboard 5 mm 9318\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eFoamboard 5 mm\u003c\/p\u003e\n\n\u003cp\u003eThese boards are incredibly versatile, and their dense foam construction gives you a cleaner cut and optimal support for your creations.\u003c\/p\u003e\n\n\u003cp\u003eThe dense foam section is sandwiched between two thin card layers, allowing inks, paints and toppers to adhere to the surface more easily compared to a more porous foam surface. It can be painted, decorated and nailed. Before painting, add a thin layer of PVA glue to reduce or almost eliminate the low porosity of this material.\u003c\/p\u003e\n\n\u003cp\u003eThe inner foam can be easily textured by hand or with textured rolling pins. We recommend using rolling pins with simple textures such as bricks, cobblestones, paving and frozen.\u003c\/p\u003e\n\n\u003cp\u003eBasic scratch material for all dioramas and scratch builds.\u003c\/p\u003e\n\n\u003cp\u003eColor: white\u003c\/p\u003e\n\n\u003cp\u003eDimensions: 200 x 300 mm.\u003c\/p\u003e\n\n\u003cp\u003eThickness: 5 mm\u003c\/p\u003e\n\n\u003cp\u003eQuantity: 2 sheets\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222467797322,"sku":"GSW9318","price":3.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/9318-foamboard-5-mm-1.webp?v=1772304953"},{"product_id":"rolling-pin-mesh-1421","title":"Rolling Pin Mesh 1421","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Mesh 1421\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTextured rollers capable of printing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in different textures that you can buy according to your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inches)\u003c\/p\u003e\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface to be textured. For optimal results, ensure you have a smooth and even surface before impressing with the rollers. \u003cstrong\u003eWe recommend using a regular roller for this.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the roller to avoid sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly and apply equal pressure at all points for a uniform texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut away excess putty\/clay with a sharp knife. It is recommended to do this after it has dried to prevent distortions in the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\u003cp\u003eThere are many different types of putty and clay on the market, and all of them can be textured with the correct technique.\u003c\/p\u003e\n\u003cp\u003eUsually, polymer clay (Fimo or Sculpey type) is quite easy to work with these rolling pins, as they allow for easy correction of errors before baking. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly on an MDF base and then place everything in the oven, including the base. The cooking time for these clays is about 15 minutes at 150ºC. MDF wood may leave a slight smell, similar to toasted bread, but don't worry, it won't burn!\u003c\/p\u003e\n\u003cp\u003eIn the case of epoxy putties, there are different techniques that yield similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic surfaces.\u003c\/p\u003e\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to lightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\u003cp\u003eOther epoxy putties such as Milliput putty are also suitable, but we recommend not wetting them too much as this will hinder your work. Additionally, if the mixture is too sticky, it is better to knead until the stickiness is gone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor this type of epoxy putties, it is very important to clean the rollers thoroughly after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\u003cp\u003eAfter working with the rollers, use a scratch brush and plenty of water to remove any residue on the rollers, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\u003cp\u003eTo ensure safety, children should be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222468550986,"sku":"GSW1421","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/1421-rolling-pin-mesh-1.webp?v=1772304962"},{"product_id":"rolling-pin-dark-runes-1279","title":"Rolling Pin Dark Runes 1279","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Dark Runes 1279\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTextured rolling pins able to print a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several textures which you can buy according to your particular needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inch)\u003c\/p\u003e\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to the manufacturer’s recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface to be textured. For optimal results, ensure you have a smooth and even surface before embossing with the rollers. \u003cstrong\u003eWe recommend using a regular roller for this purpose.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the roller to avoid sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying equal pressure at all points for a uniform texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut off excess putty\/clay with a sharp blade. It is recommended to do this after it has dried to prevent distortion of the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\u003cp\u003eThere are a multitude of different types of putty and clay on the market and all of them can be textured with the correct technique.\u003c\/p\u003e\n\u003cp\u003eUsually, polymer clay (Fimo or Sculpey type) is quite easy to work with these rolling pins since they allow easy correction of errors before baking. If the intention is to make a textured base, we recommend using an MDF base since you can texture the polymer clay directly on an MDF base and then put everything in the oven, including the base. The cooking time for these clays is about 15 minutes at 150ºC. MDF wood can give off a slight smell, similar to that of toasted bread, but don't worry, it won't burn!\u003c\/p\u003e\n\u003cp\u003eIn the case of epoxy putties, there are different techniques that achieve similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic bases.\u003c\/p\u003e\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to lightly moisten the putty or the roller with some water before texturing. You can also reduce its stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\u003cp\u003eOther epoxy putties such as the Milliput putty, for example, are also suitable, but we recommend not wetting them too much as this will hinder your work. In addition, if the mixture is too sticky, it is better to continue kneading until the stickiness disappears.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor these types of epoxy putties, it is very important to clean the rollers thoroughly after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\u003cp\u003eAfter working with the rollers, use a scratch brush and plenty of water to remove any residue left on the rollers, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\u003cp\u003eTo ensure safety, children should be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222468583754,"sku":"GSW1279","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/1279-rolling-pin-hobby-roller-dark-runes-1.webp?v=1772304960"},{"product_id":"rolling-pin-flagstone-15mm-2950","title":"Rolling Pin Flagstone 15mm 2950","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Flagstone 15mm 2950\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTextured rollers capable of imprinting a continuous repeat pattern on clay and putty. Made from clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in different textures that you can buy based on your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inch)\u003c\/p\u003e\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface to be textured. For optimal results, ensure you have a smooth and even surface before impressing with the rollers. \u003cstrong\u003eWe recommend using a plain roller for this purpose.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the roller to prevent sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying equal pressure at all points for an even texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut away excess putty\/clay with a sharp knife. It is recommended to do this after it has dried to prevent deformations in the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\u003cp\u003eThere are numerous different types of putty and clay on the market and all of them can be textured with the proper technique.\u003c\/p\u003e\n\u003cp\u003eUsually, polymer clay (Fimo or Sculpey type) is quite easy to work with these rolling pins, as they allow for easy correction of mistakes before baking. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly onto an MDF base and then place everything in the oven, including the base. The cooking time for these clays is approximately 15 minutes at 150ºC. MDF wood may leave a slight smell, similar to toasted bread, but don't worry, it won't burn!\u003c\/p\u003e\n\u003cp\u003eIn the case of epoxy putties, there are different techniques that yield similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic surfaces.\u003c\/p\u003e\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to slightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\u003cp\u003eOther epoxy putties such as Milliput putty are also suitable, but we recommend not wetting them too much as this will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor this type of epoxy putties, it is very important to clean the rollers thoroughly after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\u003cp\u003eAfter working with the rollers, use a scratch brush and plenty of water to remove any residue on the rollers, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\u003cp\u003eTo ensure safety, children should be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222468944202,"sku":"GSW2950","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/2950-rolling-pin-flagstone-15mm-1.webp?v=1772304970"},{"product_id":"rolling-pin-pavement-1301","title":"Rolling Pin Pavement 1301","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Pavement 1301\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTextured rolling pins able to print a continuous repeated pattern on clay and putty. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several textures that you can buy according to your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inch)\u003c\/p\u003e\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to the manufacturer’s recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Extend the putty\/clay on a surface to be textured. To ensure an optimal result, make sure you have a smooth and even surface before impressing with the rolling pins. \u003cstrong\u003eWe recommend using a plain rolling pin for this.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the roller to prevent sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying equal pressure at all points for an even texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut off any excess putty\/clay using a sharp blade. It is recommended to do this after it has dried to avoid deforming the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\u003cp\u003eThere are tons of different types of putty and clay on the market, and all of them can be textured with the proper technique.\u003c\/p\u003e\n\u003cp\u003eNormally, polymer clay (Fimo or Sculpey type) is quite easy to work with these rolling pins, as they allow an easy correction of errors before baking them. If the intention is to make a textured base, we recommend using an MDF base, as you can texture the polymer clay directly on an MDF base and then place everything in the oven, including the base. The cooking time for these clays is approximately 15 minutes at 150ºC. MDF wood can leave a slight smell, similar to that of toasted bread, but don't worry, it won't burn!\u003c\/p\u003e\n\u003cp\u003eIn the case of epoxy putties, there are different techniques that achieve similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic bases.\u003c\/p\u003e\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to slightly moisten the putty or the roller with some water before texturing. You can also reduce its stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\u003cp\u003eOther epoxy putties such as, for example, the Milliput putty are also suitable, but we recommend not to wet them too much as this will hinder your work. In addition, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor this type of epoxy putties, it is very important to clean the rollers well after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\u003cp\u003eAfter working with the rollers, use a scratch brush and plenty of water to remove any residue left on the rollers, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\u003cp\u003eTo ensure safety, children should be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222469009738,"sku":"GSW1301","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/1301-rolling-pin-hobby-roller-pavement-1.webp?v=1772304969"},{"product_id":"rolling-pin-arabic-2166","title":"Rolling Pin Arabic 2166","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Arabic 2166\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTextured rollers capable of imprinting a continuous repeating pattern on clay and putty. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in different textures that you can purchase according to your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inch)\u003c\/p\u003e\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface that needs to be textured. To ensure optimal results, make sure you have a smooth and even surface before impressing with the rollers. \u003cstrong\u003eWe recommend using a regular roller for this purpose.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to moisten the roller to prevent sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying equal pressure at all points for an even texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut away any excess putty\/clay with a sharp knife. It is recommended to do this after it has dried to prevent distortion of the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\u003cp\u003eThere are numerous different types of putty and clay on the market, and all of them can be textured with the right technique.\u003c\/p\u003e\n\u003cp\u003eUsually, polymer clay (Fimo or Sculpey type) is quite easy to work with these rolling pins, as they allow for easy correction of mistakes before baking. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly on an MDF base and then place everything in the oven, including the base. The baking time for these clays is approximately 15 minutes at 150ºC. MDF wood may leave a slight odor, similar to toasted bread, but don't worry, it won't burn!\u003c\/p\u003e\n\u003cp\u003eIn the case of epoxy putties, there are various techniques that yield similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic surfaces.\u003c\/p\u003e\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to slightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\u003cp\u003eOther epoxy putties like Milliput putty, for example, are also suitable, but we recommend not wetting them too much as this will hinder your work. Additionally, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor this type of epoxy putty, it is very important to clean the rollers thoroughly after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\u003cp\u003eAfter working with the rollers, use a scratch brush and plenty of water to remove any residue from the rollers, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\u003cp\u003eTo ensure safety, children must be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222469075274,"sku":"GSW2166","price":12.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/2166-rolling-pin-arabic-1.webp?v=1772304970"},{"product_id":"rolling-pin-china-2167","title":"Rolling Pin China 2167","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin China 2167\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTextured rolling pins able to print a continuous repeated pattern on clay and putty. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in a variety of textures you can buy according to your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inch)\u003c\/p\u003e\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface to be textured. For optimal results, ensure you have a smooth and even surface before impressing with the rollers. \u003cstrong\u003eWe recommend using a regular roller for this purpose.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the roller to prevent sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying equal pressure at all points for an even texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut off any excess putty\/clay with a sharp knife. It is recommended to do this after it has dried to prevent distortions in the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\u003cp\u003eThere are numerous different types of putty and clay on the market, and all of them can be textured with the proper technique.\u003c\/p\u003e\n\u003cp\u003eTypically, polymer clay (Fimo or Sculpey type) is quite easy to work with these rolling pins, as they allow for easy correction of mistakes before baking. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly onto an MDF base and then place everything into the oven, including the base. The cooking time for these clays is approximately 15 minutes at 150ºC. MDF wood may leave a slight odor, similar to toasted bread, but don't worry, it won't burn!\u003c\/p\u003e\n\u003cp\u003eIn the case of epoxy putties, there are different techniques that achieve similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic bases.\u003c\/p\u003e\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is necessary to slightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\u003cp\u003eOther epoxy putties like Milliput putty are also suitable, but we recommend not wetting them too much as this will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor these types of epoxy putties, it is very important to clean the rollers thoroughly after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\u003cp\u003eAfter working with the rollers, use a scratch brush and plenty of water to remove any residue on the rollers, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\u003cp\u003eTo ensure safety, children must be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222469370186,"sku":"GSW2167","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/2167-rolling-pin-chinese-1.webp?v=1772304977"},{"product_id":"rolling-pin-vampire-2461","title":"Rolling Pin Vampire 2461","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Vampire 2461\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTextured rolling pins capable of imprinting a continuous repeated pattern on clay and putty. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in different textures that you can buy based on your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inch)\u003c\/p\u003e\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface to be textured. For optimum results, ensure you have a smooth and even surface before making impressions with the rollers. \u003cstrong\u003eWe recommend using a plain roller for this.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the roller to prevent sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying equal pressure at all points for an even texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut away excess putty\/clay with a sharp knife. It is recommended to do this after it has dried to prevent deformation of the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\u003cp\u003eThere are numerous different types of putties and clays on the market, and all of them can be textured with the right technique.\u003c\/p\u003e\n\u003cp\u003eUsually, polymer clay (Fimo or Sculpey type) is quite easy to work with these rolling pins, as they allow for easy correction of mistakes before baking. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly onto an MDF base and then place everything, including the base, into the oven. The cooking time for these clays is about 15 minutes at 150ºC. MDF wood may leave a slight smell, similar to that of toasted bread, but don't worry, it won't burn!\u003c\/p\u003e\n\u003cp\u003eIn the case of epoxy putties, there are different techniques that yield similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic surfaces.\u003c\/p\u003e\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to slightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\u003cp\u003eOther epoxy putties such as Milliput putty are also suitable, but we recommend not wetting them too much as this will hinder your work. Furthermore, if the mixture is too sticky, it is better to knead it further until the stickiness is gone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor this type of epoxy putties, it is very important to clean the rollers thoroughly after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\u003cp\u003eAfter working with the rollers, use a scratch brush and plenty of water to remove any residue on the rollers, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\u003cp\u003eTo ensure safety, children must be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222469402954,"sku":"GSW2461","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/2461-rolling-pin-vampire-1.webp?v=1772304978"},{"product_id":"rolling-pin-atlantis-2502","title":"Rolling Pin Atlantis 2502","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Atlantis 2502\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTextured rollers capable of printing a continuous repeated pattern on clay and putty. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in different textures that you can buy according to your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inch)\u003c\/p\u003e\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface that needs to be textured. For optimal results, ensure you have a smooth and even surface before impressing with the rollers. \u003cstrong\u003eWe recommend using a plain roller for this purpose.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the roller to prevent sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying equal pressure at all points for an even texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Trim away excess putty\/clay with a sharp knife. It is recommended to do this after it has dried to prevent deformation of the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\u003cp\u003eThere are numerous different types of putty and clay on the market, and all of them can be textured with the right technique.\u003c\/p\u003e\n\u003cp\u003eUsually, polymer clay (Fimo or Sculpey type) is quite easy to work with these rolling pins, as they allow for easy correction of errors before baking. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly onto an MDF base and then place everything, including the base, into the oven. The cooking time for these clays is approximately 15 minutes at 150ºC. MDF wood may leave a slight odor, similar to that of toasted bread, but don't worry, it will not burn!\u003c\/p\u003e\n\u003cp\u003eIn the case of epoxy putties, there are various techniques that yield similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic surfaces.\u003c\/p\u003e\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to slightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\u003cp\u003eOther epoxy putties such as Milliput putty are also suitable, but we recommend not wetting them too much as this will hinder your work. Moreover, if the mixture is too sticky, it is better to continue kneading until the stickiness disappears.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor this type of epoxy putties, it is very important to clean the rollers thoroughly after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\u003cp\u003eAfter working with the rollers, use a scratch brush and plenty of water to remove any residue on the rollers, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\u003cp\u003eTo ensure safety, children should be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222469566794,"sku":"GSW2502","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/2502-rolling-pin-atlantis-idoneth-deepkin-1.webp?v=1772304980"},{"product_id":"rolling-pin-diamond-plate-2509","title":"Rolling Pin Diamond Plate 2509","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Diamond Plate 2509\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTextured rolling pins able to print a continuous repeated pattern on clay and putty. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several different textures that you can purchase according to your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inch)\u003c\/p\u003e\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface that needs to be textured. For optimum results, ensure you have a smooth and even surface before impressing with the rollers. \u003cstrong\u003eWe recommend using a plain roller for this.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the roller to prevent sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying equal pressure at all points for an even texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut off any excess putty\/clay with a sharp knife. It is recommended to do this after it has dried to avoid deformations in the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\u003cp\u003eThere are many different types of putties and clays on the market, and all of them can be textured with the correct technique.\u003c\/p\u003e\n\u003cp\u003eCommonly, polymer clay (Fimo or Sculpey type) is quite easy to work with these rolling pins, as they allow easy correction of mistakes before baking. If the intention is to make a textured base, we recommend using an MDF base, as you can texture the polymer clay directly onto an MDF base and then place everything in the oven, including the base. The cooking time for these clays is approximately 15 minutes at 150ºC. MDF wood may give off a slight odor, similar to that of toasted bread, but don't worry, it will not burn!\u003c\/p\u003e\n\u003cp\u003eIn the case of epoxy putties, there are various techniques that yield similar results. The good thing is, you don't have to bake them, so they can be applied directly to plastic bases.\u003c\/p\u003e\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to lightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\u003cp\u003eOther epoxy putties such as Milliput putty are also suitable, but we recommend not to wet them too much as this will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness disappears.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor this type of epoxy putties, it is very important to clean the rollers thoroughly after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\u003cp\u003eAfter working with the rollers, use a scratch brush and plenty of water to remove any residue on the rollers, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\u003cp\u003eTo ensure safety, children must be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222469796170,"sku":"GSW2509","price":12.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/2509-rolling-pin-diamond-plate-checkered-plate-2509.webp?v=1772304985"},{"product_id":"rolling-pin-cashmere-1499","title":"Rolling Pin Cashmere 1499","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Cashmere 1499\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTextured rolling pins capable of impressing a continuous repeat pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in a variety of textures which you can purchase according to your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inch)\u003c\/p\u003e\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface to be textured. For optimal results, ensure you have a smooth and even surface before impressing with the rolling pins. \u003cstrong\u003eWe recommend using a plain roller for this purpose.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the rolling pin to avoid sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying equal pressure at all points for a uniform texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut off excess putty\/clay with a sharp knife. It is recommended to do this after it has dried to prevent distortion of the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\u003cp\u003eThere are numerous different types of putties and clays on the market and all of them can be textured with the proper technique.\u003c\/p\u003e\n\n\u003cp\u003eUsually, polymer clay (Fimo or Sculpey type) is quite easy to work with these rolling pins, as they allow for easy correction of mistakes before baking. If the intention is to make a textured base, we recommend using an MDF base, as you can texture the polymer clay directly on an MDF base and then place everything, including the base, into the oven. The cooking time for these clays is approximately 15 minutes at 150ºC. MDF wood may leave a slight odor, similar to that of toasted bread, but don't worry, it won't burn!\u003c\/p\u003e\n\n\u003cp\u003eIn the case of epoxy putties, there are several techniques that yield similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic bases.\u003c\/p\u003e\n\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to slightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\n\u003cp\u003eOther epoxy putties such as, for example, Milliput putty are also suitable, but we recommend not to over-wet them as this will hinder your work. Additionally, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFor this type of epoxy putties, it is very important to clean the rolling pins thoroughly after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\u003cp\u003eAfter working with the rolling pins, use a scrubbing brush and plenty of water to remove any residue on the rolling pins, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\u003cp\u003eTo ensure safety, children should be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222469960010,"sku":"GSW1499","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/1499-rolling-pin-cashmere-paisley-1.webp?v=1772304988"},{"product_id":"rolling-pin-roman-1993","title":"Rolling Pin Roman 1993","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Roman 1993\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTextured rolling pins capable of impressing a continuous repeated pattern on clay and putty. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in different textures that you can buy based on your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inches)\u003c\/p\u003e\n\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface to be textured. For optimum results, ensure you have a smooth and even surface before impressing with the rolling pins. \u003cstrong\u003eWe recommend using a plain rolling pin for this purpose.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the rolling pin to avoid sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying even pressure at all points for a uniform texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut off excess putty\/clay with a sharp knife. It is recommended to do this after it has dried to prevent distortion of the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\n\u003cp\u003eThere are numerous different types of putty and clay on the market, and all of them can be textured with the right technique.\u003c\/p\u003e\n\n\u003cp\u003eTypically, polymer clay (Fimo or Sculpey type) is quite easy to work with these rolling pins, as they allow for easy correction of mistakes before baking. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly onto an MDF base and then place everything, including the base, into the oven. The cooking time for these clays is about 15 minutes at 150ºC. MDF wood may leave a slight odor, similar to that of toasted bread, but don't worry, it won't burn!\u003c\/p\u003e\n\n\u003cp\u003eIn the case of epoxy putties, there are different techniques that yield similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic surfaces.\u003c\/p\u003e\n\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to slightly moisten the putty or the rolling pin with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\n\u003cp\u003eOther epoxy putties such as, for example, Milliput putty are also suitable, but we recommend not wetting them too much as this will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFor this type of epoxy putties, it is very important to clean the rolling pins thoroughly after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\n\u003cp\u003eAfter working with the rolling pins, use a scratch brush and plenty of water to remove any residue on the rolling pins, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\n\u003cp\u003eTo ensure safety, children should be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222469992778,"sku":"GSW1993","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/1993-rolling-pin-roman-1.webp?v=1772304988"},{"product_id":"rolling-pin-sett-pavement-1994","title":"Rolling Pin Sett Pavement 1994","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Sett Pavement 1994\u003c\/strong\u003e Textured rollers capable of impressing a continuous repeated pattern on clay and putty.\u003c\/p\u003e\n\u003cp\u003eMade of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in a variety of textures that you can purchase according to your specific needs. Length: 14'50 cm (5'5 inch) Diameter: 2'5cm (1 inch)\u003c\/p\u003e\n\u003cp\u003eRecommended scales: 1\/35 - 1\/43 - 1\/48 - 1\/76\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINSTRUCTIONS FOR USE:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to the manufacturer’s recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface to be textured. To ensure optimum results, make sure you have a smooth and even surface before impressing with the rollers. *** We recommend using a regular roller for this.\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the roller to avoid sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying equal pressure at all points for an even texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Trim off any excess putty\/clay with a sharp knife. It is recommended to do this after it has dried to avoid distortions in the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMATERIALS:\u003c\/strong\u003e There are numerous types of putty and clay on the market, and all can be textured with the proper technique. Typically, polymer clay (Fimo or Sculpey type) is quite easy to work with these rolling pins, as they allow for easy correction of mistakes before baking. If the intention is to make a textured base, we recommend using an MDF base, as you can texture the polymer clay directly onto an MDF base and then place everything in the oven, including the base.\u003c\/p\u003e\n\u003cp\u003eThe cooking time for these clays is about 15 minutes at 150ºC. MDF wood may leave a slight smell, similar to that of toasted bread, but don't worry, it will not burn! In the case of epoxy putties, there are different techniques that will give similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic surfaces.\u003c\/p\u003e\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to lightly moisten the putty or the roller with some water before texturing.\u003c\/p\u003e\n\u003cp\u003eYou can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\u003cp\u003eOther epoxy putties such as, for example, Milliput putty are also suitable, but we recommend not to wet them too much as this will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone.\u003c\/p\u003e\n\u003cp\u003e*** For this type of epoxy putties, it is very important to clean the rollers well after use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMAINTENANCE INSTRUCTIONS:\u003c\/strong\u003e After working with the rollers, use a scratch brush and plenty of water to remove any residue from the rollers, if necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAFETY:\u003c\/strong\u003e To ensure safety, children must be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222470025546,"sku":"GSW1994","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/1994rolling-pin-sett-pavement1.jpg?v=1774294030"},{"product_id":"rolling-pin-mandala-1999","title":"Rolling Pin Mandala 1999","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Mandala 1999\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTextured rolling pins capable of printing a continuous repeated pattern on clay and putty. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in different textures that you can purchase according to your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inch)\u003c\/p\u003e\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface to be textured. For optimal results, ensure you have a smooth and even surface before impressing with the rollers. \u003cstrong\u003eWe recommend using a plain roller for this.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the roller to prevent sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying equal pressure at all points for an even texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut away any excess putty\/clay with a sharp knife. It is recommended to do this after it has dried to prevent distortions in the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\u003cp\u003eThere are many different types of putty and clay on the market, and all of them can be textured with the proper technique.\u003c\/p\u003e\n\u003cp\u003eUsually, polymer clay (Fimo or Sculpey type) is quite easy to work with these rolling pins, as they allow for easy correction of mistakes before baking. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly onto an MDF base and then place everything, including the base, in the oven. The cooking time for these clays is approximately 15 minutes at 150ºC. MDF wood may leave a slight smell, similar to that of toasted bread, but don't worry, it will not burn!\u003c\/p\u003e\n\u003cp\u003eIn the case of epoxy putties, there are several techniques that yield similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic bases.\u003c\/p\u003e\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to slightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\u003cp\u003eOther epoxy putties like, for example, Milliput putty are also suitable, but we recommend not wetting them too much as this will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor these types of epoxy putties, it is very important to clean the rollers thoroughly after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\u003cp\u003eAfter working with the rollers, use a scratch brush and plenty of water to remove any residue from the rollers, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\u003cp\u003eTo ensure safety, children must be closely monitored by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222470320458,"sku":"GSW1999","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/e79ca63d-1999-rolling-pin-mandala-1.webp?v=1772304994"},{"product_id":"rolling-pin-ancestral-recall-1504","title":"Rolling Pin Ancestral Recall 1504","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Ancestral Recall 1504\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTextured rolling pins capable of impressing a continuous repeated pattern on clay and putty. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in different textures that you can purchase according to your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inch)\u003c\/p\u003e\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface to be textured. For optimal results, ensure you have a smooth and even surface before impressing with the rollers. \u003cstrong\u003eWe recommend using a regular roller for this.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the roller to prevent sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying equal pressure at all points for a uniform texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut away excess putty\/clay with a sharp blade. It is recommended to do this after it has dried to prevent distortion of the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\n\u003cp\u003eThere are numerous different types of putty and clay on the market, and all can be textured with the proper technique.\u003c\/p\u003e\n\n\u003cp\u003eUsually, polymer clay (Fimo or Sculpey type) is quite easy to work with these rolling pins, as they allow for easy correction of errors before baking. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly onto an MDF base and then place everything, including the base, into the oven. The cooking time for these clays is approximately 15 minutes at 150ºC. MDF wood may give off a slight odor, similar to toasted bread, but don't worry, it won't burn!\u003c\/p\u003e\n\n\u003cp\u003eIn the case of epoxy putties, there are different techniques that yield similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic surfaces.\u003c\/p\u003e\n\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to slightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\n\u003cp\u003eOther epoxy putties like Milliput putty, for example, are also suitable, but we recommend not wetting them too much as this will hinder your work. Moreover, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFor these types of epoxy putties, it is very important to clean the rollers thoroughly after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\n\u003cp\u003eAfter working with the rollers, use a scratch brush and plenty of water to remove any residue on the rollers, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\n\u003cp\u003eTo ensure safety, children must be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222470418762,"sku":"GSW1504","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/1504-rolling-pin-hobby-roller-ancestral-recall-1.webp?v=1772304998"},{"product_id":"rolling-pin-temple-1373","title":"Rolling Pin Temple 1373","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Temple 1373\u003c\/strong\u003e Textured rollers able to print a continuous repeated pattern on clay and putties.\u003c\/p\u003e\n\u003cp\u003eMade of clear PMMA plastic with amazing non-stick properties. Non-toxic.\u003c\/p\u003e\n\u003cp\u003eThey come in different textures that you can buy based on your specific needs. Length: 14'50 cm (5'5 inch) Diameter: 2'5cm (1 inch)\u003c\/p\u003e\n\u003cp\u003eRecommended scales: 1\/35 - 1\/43 - 1\/48 - 1\/76\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINSTRUCTIONS FOR USE:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1st - Mix the putty\/clay thoroughly until ready according to the manufacturer’s recommendations.\u003c\/li\u003e\n\u003cli\u003e2nd - Extend the putty\/clay on a surface to be textured. For optimum results ensure you have a smooth and even surface before impressing with the rollers. *** We recommend using a conventional roller for this.\u003c\/li\u003e\n\u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the roller to prevent sticking.\u003c\/li\u003e\n\u003cli\u003e4th - Move the rolling pin slowly and exert equal pressure at all points for an even texture.\u003c\/li\u003e\n\u003cli\u003e5th - Cut away excess putty\/clay with a sharp blade. It is recommended to do this after it has dried to avoid deforming the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMATERIALS:\u003c\/strong\u003e There are a lot of different kinds of putties and clays on the market, and all of them can be textured with the proper technique.\u003c\/p\u003e\n\u003cp\u003eCommonly, polymer clay (Fimo or Sculpey type) are quite easy to work with these rolling pins as they allow for easy correction of mistakes before baking. If the intention is to make a textured base, we recommend using an MDF base, as you can texture the polymer clay directly onto an MDF base and then place everything, including the base, into the oven.\u003c\/p\u003e\n\u003cp\u003eThe cooking time for these types of clays is about 15 minutes at 150ºC. MDF wood may leave a slight smell, similar to that of toasted bread, but don't worry, it won't burn! In the case of epoxy putties, there are different techniques that allow for similar results. The good thing is, you don't have to bake them, so they can be applied directly to plastic bases.\u003c\/p\u003e\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to lightly moisten the putty or the roller with some water before texturing.\u003c\/p\u003e\n\u003cp\u003eYou can also reduce its stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\u003cp\u003eOther epoxy putties such as, for example, the Milliput putty are also suitable, but we recommend not to wet them too much as this will hinder your work. In addition, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone.\u003c\/p\u003e\n\u003cp\u003e*** For this type of epoxy putties, it is very important to clean the rollers properly after use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMAINTENANCE INSTRUCTIONS:\u003c\/strong\u003e After working with the rollers, use a scratch brush and plenty of water to remove any residue on the rollers, if necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAFETY:\u003c\/strong\u003e To ensure safety, children should be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222470451530,"sku":"GSW1373","price":12.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/1373-1rolling-pin-hobby-roller-temple.jpg?v=1775677479"},{"product_id":"rolling-pin-small-cobblestone-1374","title":"Rolling Pin Small Cobblestone 1374","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Small Cobblestone 1374\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTextured rollers that are able to press a continuous repeated pattern on clay and putty. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several textures which you can buy depending on your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inch)\u003c\/p\u003e\n\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface to be textured. For optimum results, ensure you have a smooth and even surface before impressing with the rollers. \u003cstrong\u003eWe recommend using a regular roller for this.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the roller to prevent sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly and apply equal pressure at all points for a uniform texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut away excess putty\/clay with a sharp knife. It is recommended to do this after it has dried to prevent distortion in the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\n\u003cp\u003eThere are many different types of putties and clays on the market, and all of them can be textured with the proper technique.\u003c\/p\u003e\n\n\u003cp\u003eTypically, polymer clays (Fimo or Sculpey type) are quite easy to work with these rolling pins, as they allow for easy correction of mistakes before baking. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly onto an MDF base and then place everything in the oven, including the base. The cooking time for these clays is approximately 15 minutes at 150ºC. MDF wood may leave a slight odor, similar to that of toasted bread, but don't worry, it will not burn!\u003c\/p\u003e\n\n\u003cp\u003eIn the case of epoxy putties, there are several techniques that yield similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic surfaces.\u003c\/p\u003e\n\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to lightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\n\u003cp\u003eOther epoxy putties such as, for example, Milliput putty are also suitable, but we recommend not wetting them too much as this will hinder your work. Additionally, if the mixture is too sticky, it is better to knead it until the stickiness is gone.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFor this type of epoxy putties, it is very important to clean the rollers thoroughly after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\n\u003cp\u003eAfter working with the rollers, use a scratch brush and plenty of water to remove any residue from the rollers, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\n\u003cp\u003eTo ensure safety, children should be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222470484298,"sku":"GSW1374","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/1374-rolling-pin-hobby-roller-small-cobblestone-1.webp?v=1772304998"},{"product_id":"rolling-pin-small-bricks-1376","title":"Rolling Pin Small Bricks 1376","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Small Bricks 1376\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTextured rollers capable of imprinting a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in different textures that you can purchase according to your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inch)\u003c\/p\u003e\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface to be textured. For optimal results, ensure you have a smooth and even surface before imprinting with the rollers. \u003cstrong\u003eWe recommend using a plain roller for this.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the roller to prevent sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying equal pressure at all points for a uniform texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut away excess putty\/clay with a sharp knife. It is recommended to do this after it has dried to prevent distortion of the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\u003cp\u003eThere are numerous different types of putties and clays on the market, and all of them can be textured with the correct technique.\u003c\/p\u003e\n\u003cp\u003eUsually, polymer clay (Fimo or Sculpey type) is quite easy to work with these rolling pins, as they allow for easy correction of mistakes before baking. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly on an MDF base and then place everything in the oven, including the base. The baking time for these clays is approximately 15 minutes at 150ºC. MDF wood may leave a slight smell, similar to that of toasted bread, but don't worry, it won't burn!\u003c\/p\u003e\n\u003cp\u003eIn the case of epoxy putties, there are various techniques that yield similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic surfaces.\u003c\/p\u003e\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to lightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\u003cp\u003eOther epoxy putties such as, for example, Milliput putty are also suitable, but we advise against making them too wet as this will hinder your work. Additionally, if the mixture is too sticky, it is better to continue kneading until the stickiness disappears.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor these types of epoxy putties, it is very important to clean the rollers thoroughly after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\u003cp\u003eAfter working with the rollers, use a scratch brush and plenty of water to remove any residue from the rollers, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\u003cp\u003eTo ensure safety, children must be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222470713674,"sku":"GSW1376","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/1376-rolling-pin-small-bricks-1.webp?v=1772305002"},{"product_id":"rolling-pin-hexagons-1160","title":"Rolling Pin Hexagons 1160","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Hexagons 1160\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTextured rolling pins able to print a continuous repeated pattern on clay and putty. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in different textures that you can acquire according to your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inch)\u003c\/p\u003e\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay properly until ready according to the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Extend the putty\/clay on a surface to be textured. To ensure optimum results, make sure you have a smooth and even surface before embossing with the rollers. \u003cstrong\u003eWe recommend using a plain roller for this purpose.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the roller to avoid sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly, applying equal pressure at all points for an even texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut off excess putty\/clay with a sharp knife. It is recommended to do this after it has dried to prevent distortion of the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\u003cp\u003eThere are a ton of different kinds of putties and clays on the market and all of them can be textured with the proper technique.\u003c\/p\u003e\n\u003cp\u003eUsually, polymer clay (Fimo or Sculpey type) are quite easy to work with these rolling pins as they allow for easy correction of mistakes before being baked. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly onto an MDF base and then place everything in the oven, including the base. The cooking time for these clays is approximately 15 minutes at 150ºC. MDF wood may leave a slight smell, similar to that of toasted bread, but don't worry, it won't burn!\u003c\/p\u003e\n\u003cp\u003eIn the case of epoxy putties, there are different techniques that achieve similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic bases.\u003c\/p\u003e\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to slightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\u003cp\u003eOther epoxy putties like for example the Milliput putty are also suitable, however, we recommend not to make them too wet as this will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor this type of epoxy putties, it is very important to clean the rollers thoroughly after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\u003cp\u003eAfter working with the rollers, use a scratch brush and plenty of water to remove any residue on the rollers, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\u003cp\u003eTo ensure safety, children must be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222470811978,"sku":"GSW1160","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/1160-rolling-pin-hobby-roller-hexagons-infinity-bases-1.webp?v=1772305006"},{"product_id":"rolling-pin-bricks-1162","title":"Rolling Pin Bricks 1162","description":"\u003cp\u003e\u003cstrong\u003eRolling Pin Bricks 1162\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTextured rolling pins able to print a continuous repeated pattern on clay and putty. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in different textures that you can buy based on your specific needs.\u003c\/p\u003e\n\n\u003cp\u003eLength: 14'50 cm (5'5 inches)\u003c\/p\u003e\n\u003cp\u003eDiameter: 2'5cm (1 inch)\u003c\/p\u003e\n\n\u003ch3\u003eINSTRUCTIONS FOR USE:\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e1st - Mix the putty\/clay well until ready according to the manufacturer's recommendations.\u003c\/li\u003e\n    \u003cli\u003e2nd - Spread the putty\/clay on a surface to be textured. For optimal results, ensure you have a smooth and even surface before impressing with the rollers. \u003cstrong\u003eWe recommend using a plain rolling pin for this.\u003c\/strong\u003e\n\u003c\/li\u003e\n    \u003cli\u003e3rd - Depending on the type of putty\/clay, it is advisable to wet the roller to prevent sticking.\u003c\/li\u003e\n    \u003cli\u003e4th - Move the rolling pin slowly and apply even pressure at all points for a uniform texture.\u003c\/li\u003e\n    \u003cli\u003e5th - Cut away excess putty\/clay with a sharp blade. It is recommended to do this after it has dried to prevent deformations in the putty\/clay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMATERIALS:\u003c\/h3\u003e\n\u003cp\u003eThere are many different types of putties and clays on the market, and all of them can be textured with the proper technique.\u003c\/p\u003e\n\u003cp\u003eTypically, polymer clays (Fimo or Sculpey type) are quite easy to work with these rolling pins, as they allow for easy correction of mistakes before baking. If the intention is to create a textured base, we recommend using an MDF base, as you can texture the polymer clay directly onto an MDF base and then place everything in the oven, including the base. The cooking time for these clays is approximately 15 minutes at 150ºC. MDF wood may leave a slight odor, similar to toasted bread, but don't worry, it won't burn!\u003c\/p\u003e\n\u003cp\u003eIn the case of epoxy putties, there are various techniques that yield similar results. The good thing is, you don't need to bake them, so they can be applied directly to plastic surfaces.\u003c\/p\u003e\n\u003cp\u003eFor Green Stuff putty, which is particularly sticky, it is required to lightly moisten the putty or the roller with some water before texturing. You can also reduce stickiness by applying talcum powder or using Sculptor Vaseline.\u003c\/p\u003e\n\u003cp\u003eOther epoxy putties such as, for example, Milliput putty are also suitable, but we recommend not wetting them too much as this will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor these types of epoxy putties, it is very important to clean the rollers well after use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMAINTENANCE INSTRUCTIONS:\u003c\/h3\u003e\n\u003cp\u003eAfter working with the rollers, use a scratch brush and plenty of water to remove any residue on the rollers, if necessary.\u003c\/p\u003e\n\n\u003ch3\u003eSAFETY:\u003c\/h3\u003e\n\u003cp\u003eTo ensure safety, children must be closely supervised by a responsible adult.\u003c\/p\u003e","brand":"Green Stuff World","offers":[{"title":"Default Title","offer_id":61222471205194,"sku":"GSW1162","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/1162-rolling-pin-hobby-roller-bricks-1.webp?v=1772305011"},{"product_id":"foamboard-5-mm-wit-wit-a4-2stuks","title":"Foam board 5 mm white-white A4 2 pieces","description":"\u003cp\u003e\u003cstrong\u003eFoamboard 5 mm white-white A4 2 pieces\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eFoam board 5 mm\u003c\/p\u003e\n\n\u003cp\u003eThese boards are incredibly versatile and their dense foam construction gives you a cleaner cut and optimal support for your creations.\u003c\/p\u003e\n\n\u003cp\u003eThe dense foam section is sandwiched between two thin card layers, allowing ink, paint, and toppers to adhere more easily to the surface compared to a more porous foam surface. It can be painted, decorated, and nailed. Before painting, add a thin layer of PVA glue to reduce or almost eliminate the low porosity of this material.\u003c\/p\u003e\n\n\u003cp\u003eThe internal foam can be easily textured by hand or with textured rolling pins. We recommend using rolling pins with simple textures such as bricks, cobblestones, paving, and frosted.\u003c\/p\u003e\n\n\u003cp\u003eBasic scratch material for all dioramas and scratch builds.\u003c\/p\u003e\n\n\u003cp\u003eColor white\u003c\/p\u003e\n\n\u003cp\u003eDimensions: 210 x 300 mm.\u003c\/p\u003e\n\n\u003cp\u003eThickness: 5 mm\u003c\/p\u003e\n\n\u003cp\u003eQuantity: 2 sheets\u003c\/p\u003e","brand":"Scenery en Zo","offers":[{"title":"Default Title","offer_id":61222631211338,"sku":"FOAM5MMWW","price":2.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1020\/4450\/0298\/files\/Foamboard.webp?v=1775677379"}],"url":"https:\/\/scenery-en-zo.myshopify.com\/en\/collections\/material-type-texture-roller.oembed","provider":"Scenery en Zo","version":"1.0","type":"link"}